Slicer Discord
Disposable Camera Lens - Sony E-Mount – 3D printable model from MakerWorld MakerWorld
Other Hobby & DIY

Disposable Camera Lens - Sony E-Mount

171 Downloads
57 Likes
53 Makes
Go to Model
This allows you to take the lens out of a disposable camera and use it on your mirrorless for that 90's aesthetic.Adds a 16mm hole to the cap and lengthens it to ensure focusing, the lenses from these disposable cameras are 16mm wide.Items needed:A disposable camera (I used a fujifilm one but any should work)This capSuper GluePhotos featured are unedited (apart from the removal of number plates and the addition of camera settings obviously)You will need to take apart the disposable camera and remove the lens. This is pretty easy to do with minimal tools needed. There's a lot of tutorials on this, but be warned: THE FLASH ELEMENT MAY STILL HAVE A CHARGE WHICH CAN GIVE YOU A NASTY SHOCK SO IF YOU HAVE A HEART CONDITION PLEASE BE CAREFUL!You may need to turn the camera into using APS-C mode and for it to release without lens but then you should be good to go.
Category
Other Hobby & DIY
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection