Ditto & Pikachu Hueforge 7x5

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 175x124.96mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.24mmPLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Cyan Transmission Distance: 3.5PLA BambuLab Basic Hot Pink Transmission Distance: 3.9PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4PLA BambuLab Basic White Transmission Distance: 3.5Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to CyanAt layer #12 (1.04mm) swap to Hot PinkAt layer #17 (1.44mm) swap to Sunflower YellowAt layer #23 (1.92mm) swap to White for the rest.