Thingiverse
DiveTools Gas Blending Pi Case
par pulledover
7
Téléchargements
7
Likes
0
Makes
Remix to support an open source electronics project found at:
https://github.com/divetools/Gas-Blending
This tools is designed to look at the gas mixture before or after a scuba compressor and give the O2 and He content. This is for test purposes. More info on the GitHub page.
The remix of this case makes it able to support a RPi 3 or RPi4. I've also added four 3.5mm jacks to the top to support the ADC being used for the project.
I used 3mm screws without nuts for the RPi and ADC.
https://github.com/divetools/Gas-Blending
This tools is designed to look at the gas mixture before or after a scuba compressor and give the O2 and He content. This is for test purposes. More info on the GitHub page.
The remix of this case makes it able to support a RPi 3 or RPi4. I've also added four 3.5mm jacks to the top to support the ADC being used for the project.
I used 3mm screws without nuts for the RPi and ADC.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
