Thingiverse
DIY Hexaleaf
von Tesafilm04
167
Downloads
113
Likes
1
Makes
This is my current project Diy Hexaleaf.
How do you rebuild it?
First, print as many panels (base and diffuser) as you want.
Next, cut your Led Stripes (WS2812b, 60 Leds/m) into pieces that have 20 leds and glue them into the boxes and solder everything.
Then print the control box and stick a Wemos D1 Mini with the Wled software in it.
Finally, just connect the power and your own Hexaleaf project is ready.
I hope everything is understandable and you have fun building the project yourself.
How do you rebuild it?
First, print as many panels (base and diffuser) as you want.
Next, cut your Led Stripes (WS2812b, 60 Leds/m) into pieces that have 20 leds and glue them into the boxes and solder everything.
Then print the control box and stick a Wemos D1 Mini with the Wled software in it.
Finally, just connect the power and your own Hexaleaf project is ready.
I hope everything is understandable and you have fun building the project yourself.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!