DJI Mavic Pro drop device

Inspired by Isaiahsdad's drop rig https://www.thingiverse.com/thing:2898647.

This one attaches using 2 existing screws on the mavic. I replaced the screws with slightly longer ones. The screw thread is .078" (2mm) by 40tpi. Any pitch 2mm screw will probably work since it's going into plastic.

Printed 3shell 30% infill this comes out to 7.5g and is strong enough to hold a few ounces.

During testing it was a little too easy to drop the payload so I've made a V2 with the arms sloped upward slightly. Upon testing V2 it is still possible to drop unintentionally so V3 has even steeper arms. I'm using monofilament, some string with a little more friction might work ok with the first version.