DK RISER LOW PROFILE FOR BAMBU LAB X1/P1

This is an update to my previous riser I also made one a taller one with Vent and Door, this time I want to improve on the first one Basically all the improvements I did for the Tall one in a low profile, thus without the vent holes… but instead, we use (removable) props, to prop the top glasses when we need it open… The Props has 9x3mm magnet at the back, so you can stick it to the side of the printer while not being used. I made 2 versions of the riser, 1. The Basic Riser, should be pretty straight forward. 2. The Riser with LED Tabs, if you're up for a bit of a challenge, you might want to consider this one. Both versions have “cave” (for the lack of a better word) so we can accommodate the “extra” LED to “curl” in there. <img src="https://media.