Doctor Strange

Project: docteur strange.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.11x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to Grey At layer #13 (1.12mm) swap to White for the rest. Boost Me