Dodge Challenger

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x112.55mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PETG Kingroon black Transmission Distance: 0.3 PETG Kingroon red Transmission Distance: 3 PETG Kingroon gray Transmission Distance: 5.5 PETG Kingroon orange Transmission Distance: 4.2This print uses 4 unique filamentsSwap Instructions: Start with black At layer #9 (0.8mm) swap to red At layer #13 (1.12mm) swap to gray At layer #19 (1.6mm) swap to orange for the rest.