Dog Hueforge

I have enabled 2 pauses in order to change fillament in AMS .In the first pause change black to bone white , and In the second pause change Blue Gray to white Have Fun! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 144.44x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA+ BambuLab Basic Red Transmission Distance: 5PLA BambuLab Basic Orange Transmission Distance: 7PLA+ Esun Bone White Transmission Distance: 5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #10 (0.88mm) swap to BlackAt layer #14 (1.2mm) swap to Candy RedAt layer #16 (1.36mm) swap to OrangeAt layer #18 (1.52mm) swap to Bone WhiteAt layer #22 (1.84mm) swap to Jad