Thingiverse
Dog Kennel
von Petal3D
49
Downloads
157
Likes
0
Makes
The dog kennel is based on a kennel I made. The model includes fully assembled versions and individual pieces that can be glued together. The models are 1-in-10 scale and are sized for a larger dog breed. You may scale down to suit a smaller breed.
If printing individual pieces, you will need to print two roof sections and two side wall sections. Supports are not required. For the fully assembled versions, add supports under the roof lower edges. Print using PLA with at least 20% infill. For smaller scales use a resin printer.
For my 1-in-20 diorama, I printed the kennel at 60% and the bowls at 65%.
Paint and decorate as required. Use one of the included stencils "Snoopy", "Max" or "Brutus".
An excellent dog model is Sleeping Dog https://www.thingiverse.com/thing:441027 by MustangDave. Scale about 90% to fit inside the kennel
If printing individual pieces, you will need to print two roof sections and two side wall sections. Supports are not required. For the fully assembled versions, add supports under the roof lower edges. Print using PLA with at least 20% infill. For smaller scales use a resin printer.
For my 1-in-20 diorama, I printed the kennel at 60% and the bowls at 65%.
Paint and decorate as required. Use one of the included stencils "Snoopy", "Max" or "Brutus".
An excellent dog model is Sleeping Dog https://www.thingiverse.com/thing:441027 by MustangDave. Scale about 90% to fit inside the kennel
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
