Slicer Discord
DOG LOVER – 3D printable model from Printables Printables
Other Art & Designs

DOG LOVER

712 Downloads
140 Likes
13 Makes
Go to Model
Material: PLA
layer high: 0.20
Nozzle 0.4mm
Infill: 15%
No support
Speed: 50mm/s
Total printing time: about 1h
Category
Other Art & Designs
Source
Printables
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports
Support-free Single piece
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
1 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

GIORDAN_3D_CANTU also publishes on

19 additional models across 1 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Does DOG LOVER need supports when printing?
No supports needed for DOG LOVER — it's designed to print clean off the bed.
How long does it take to print DOG LOVER?
According to the design notes, DOG LOVER takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is DOG LOVER available in?
DOG LOVER is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Printables.
Is DOG LOVER free to download?
Yes, DOG LOVER is available as a free download through Printables. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection