Dolphins V2 (hueforege)

Dolphin Pod Jumping V2. (hueforge) This is a 5 color print, with a different style and look. If you use the above print profile, it's sliced so the bottom layers are thicker to save time (saves some time). if you are setting up on a different printer use the information below to set the layers after you slice. Thanks. See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sun