Dom Luís I Bridge

by PMARTINS3DPRINT · Hueforge & Lithophane

11 Downloads

7 Likes

0 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x86.09mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA Lotactree Black Transmission Distance: 0.2PLA Lotactree Basic Orange Transmission Distance: 5PLA Lotactree White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to OrangeAt layer #17 (1.44mm) swap to White for the rest.