donald duck hueforge

Project: pato donalt.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 271x485.53mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5 This print uses 8 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Green At layer #10 (0.88mm) swap to Blue At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to Yellow At layer #20 (1.68mm) swap to Ice Blue Border Only Colors from here until the end. At layer #23 (1.92mm) swap to White for the rest.