Thingiverse
Double 1u server stand (vertical)
by citruspers
44
Downloads
29
Likes
1
Makes
STL FILES can be found here: https://www.prusaprinters.org/prints/137898-double-1u-server-stand-vertical
### Why
Rack servers are great if you have a big rack to hang them in, but if you don't, you have to improvise.
Also includes a little spacer for the top of the servers.
It works fine for me, but use at your own risk.
### Features
* No supports needed
* Holds 2 standard 1u (1.75"/44.45mm) size servers, vertically
* 200mm maximum width, should fit most printers
### Instructions
* .25mm layer height is fine
* No supports needed
* Print on its side for better strength
* Use a minimum of 3 or 4 walls and 10% infill
### Open Source
As always the original design file (fusion360 + STEP) is included, so feel free to improve it (or learn from it)!
### Why
Rack servers are great if you have a big rack to hang them in, but if you don't, you have to improvise.
Also includes a little spacer for the top of the servers.
It works fine for me, but use at your own risk.
### Features
* No supports needed
* Holds 2 standard 1u (1.75"/44.45mm) size servers, vertically
* 200mm maximum width, should fit most printers
### Instructions
* .25mm layer height is fine
* No supports needed
* Print on its side for better strength
* Use a minimum of 3 or 4 walls and 10% infill
### Open Source
As always the original design file (fusion360 + STEP) is included, so feel free to improve it (or learn from it)!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
