Slicer Discord
Double bolt action pen – 3D printable model from MakerWorld MakerWorld
Office

Double bolt action pen

54 Downloads
30 Likes
15 Makes
Go to Model
看到辛科凝即将出的双枪栓全中轴中性笔有感而发制作,欢迎改编分享,侵删。去码头整点薯条。双枪栓壳体采用卡扣固定,完全没有使用螺纹,靠圆柱后定位,圆柱和拨钮采用过盈配合。笔芯直径适配到8mm(几乎所有笔芯都可容纳),长度适配111mm(用圆柱长端)和112mm(用圆柱短端)。Inspired by the sight of “PONY XIN”'s upcoming double bolt full center Pen. Welcome to adapt and share.The meaning of life lies in going to the wharf for some fries.The double bolt housing is fixed with clasp, no thread is used at all, and is positioned behind the cylinder. The cylinder and the dial button are fitted with interference. The diameter of the refill is adapted to 8mm (almost all refill can be accommodated), and the length is adapted to 111mm (with the long end of the cylinder) and 112mm (with the short end of the cylinder).
Category
Office
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Polycarbonate
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection