Thingiverse
Double Decker Filament Rack
por FusionBolt
61
Descargas
43
Likes
1
Makes
Filament stand that holds up to 20 filament spools (using 200mm diameter x 60mm wide spools). You will need to print 4X of each part.
The bar diameter is about 23mm or 0.90 inches. I used 2 wood broom handles cut into 2X 22.5 inch (572mm) long parts that I picked up at Lowes found here: https://www.lowes.com/pd/Truper-48-in-L-Hardwood-Lawn-And-Leaf-Rake-Handle/4363237 . I cut off the tapered end but not the rounded end. I also sanded the section on the end of the wood bars until I was able to get a nice tight fit.
If you would like a version with a different bar diameter please let me know in the comments.
The bar diameter is about 23mm or 0.90 inches. I used 2 wood broom handles cut into 2X 22.5 inch (572mm) long parts that I picked up at Lowes found here: https://www.lowes.com/pd/Truper-48-in-L-Hardwood-Lawn-And-Leaf-Rake-Handle/4363237 . I cut off the tapered end but not the rounded end. I also sanded the section on the end of the wood bars until I was able to get a nice tight fit.
If you would like a version with a different bar diameter please let me know in the comments.
FusionBolt también publica en
10 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
