Double-Edged Razor Blade Handle

**There will be no more updates to this page. [Go to the new GitHub page for the latest updates.](https://github.com/DrLex0/print3d-double-edged-razorblade-scraper)**

This is a remix of the EZ-Snap Razor Blade Handle by AdanA. It has been adapted for classic double-edged (Gillette) safety razor blades. These are only 0.1mm thick and slip under prints very easily. You won't be able to lift any prints with such a blade except very small ones, but you can use the clearance to shove a thicker and larger blade or plastic sheet under the print, and easily remove it from the platform. This also works very well to remove skirts and any other small bits stuck to the platform. Just be careful to keep the blade at a low angle to avoid digging it into softer build surfaces like BuildTak.

**Update 2016/08/07:** uploaded version 2 of the model, which has a larger tab that offers a more secure mount for the blade, allowing to push harder on the blade without bending it.
**Update 2016/10/05:**