Thingiverse
Double LCD drawer Ender 3 / Pro
by DaVinci2000
2.9k
Downloads
1.7k
Likes
12
Makes
Double drawer with tray/s hidden under LCD panel suitable for Ender 3 and Pro.
Bottom drawer can fit things up to 32.5 mm high and 124.5 long, with optional one or two trays (these are identical). Mount it with four M3x6 bolts and T-nuts.
If you miss T-nuts you can print adapters for M3 nuts:
https://www.thingiverse.com/thing:3050607
If you need a regular drawer:
https://www.thingiverse.com/thing:3664764
Print settings:
- Filament: PETG, PLA
- Layer Height: **0.3**
- Line Width: **0.6** (all parts have walls of 1.2 mm thickness)
- Wall Line Count: **1**
- Top/Bottom Layers: **2**
- Fill Gaps Between Walls: **Nowhere**
- Flow: 105-110% (a bit more than usual to increase adjacent lines adhesion)
- Infill: **0%**
- Temperature: **+5..15** to regular temp due to thick and wide lines
Check out my other designs:
https://www.thingiverse.com/DaVinci2000/designs
Bottom drawer can fit things up to 32.5 mm high and 124.5 long, with optional one or two trays (these are identical). Mount it with four M3x6 bolts and T-nuts.
If you miss T-nuts you can print adapters for M3 nuts:
https://www.thingiverse.com/thing:3050607
If you need a regular drawer:
https://www.thingiverse.com/thing:3664764
Print settings:
- Filament: PETG, PLA
- Layer Height: **0.3**
- Line Width: **0.6** (all parts have walls of 1.2 mm thickness)
- Wall Line Count: **1**
- Top/Bottom Layers: **2**
- Fill Gaps Between Walls: **Nowhere**
- Flow: 105-110% (a bit more than usual to increase adjacent lines adhesion)
- Infill: **0%**
- Temperature: **+5..15** to regular temp due to thick and wide lines
Check out my other designs:
https://www.thingiverse.com/DaVinci2000/designs
DaVinci2000 also publishes on
65 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
