Thingiverse

DoubleTwistVase2

by bbinnard

25 Downloads

17 Likes

0 Makes

Although it doesn't look like it, I used the same basic technique design methods that I used for DoubleTwistVase1 (https://www.thingiverse.com/thing:2371331). This part printed in 32 3/4 hours using a 0.200 mm layer height and a print speed of 100 mm/sec.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for DoubleTwistVase2?

Any FDM printer should handle DoubleTwistVase2 just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print DoubleTwistVase2?

According to the design notes, DoubleTwistVase2 takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is DoubleTwistVase2 available in?

DoubleTwistVase2 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is DoubleTwistVase2 free to download?

Yes, DoubleTwistVase2 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

DoubleTwistVase2

Similar Models

Add to Collection