Dowel Shelf (A1 mini compatible)

No supports needed | Add Brim | A1 Mini Compatible Compatible only with medium topology optimized shelf bracket Materials used:Dowels5 pcs (Length depends on what you need)Add at least 2 inches to the initial size of your dowel so you can insert it into the dowel holesDowel size: 22 mmFilaments:Sunlu PLA Matte - OakPolymaker Panchroma PLA Matte - Muted GreenScrews / heavy-duty double-sided tape Assembly / Attaching:Step 1:Screw the dowel holder to the shelf bracket FIRST.Step 2:Insert the 5 dowels into their holes.Step 3:Once done, screw the shelf brackets to the wall. Notes:This is a snug fit. Make sure you measure your dowels.If the holes of the shelf bracket do not align with the holes in the wall, adjust them by lightly hammering.The middle bracket is optional. I added it so the setup can handle more load and prevent the wood from bending in the middle.In the file, you will see a Center - half plate. That is what I used. During installation, I attached the middle bracket first so i