Thingiverse
Doweling Jig
134
Download
76
Likes
0
Makes
Assembly:
1. Slide dovetail into main body with the locating notch going in first
2. Superglue the fence to the dovetail (be sure to not use too much superglue that it glues the dovetail into the main body).
3. Superglue knob onto hex head of 5mm x 8mm bolt and glue the washer down the bolt to the knob.
4. Remove dovetail from main body slot and screw in 5mm x 8mm hex bolt (you may have to tap the hole to make this more smooth, I suggest it).
Depending on your printer, you may need to ream the 5/16in holes to ensure the bit fits.
1. Slide dovetail into main body with the locating notch going in first
2. Superglue the fence to the dovetail (be sure to not use too much superglue that it glues the dovetail into the main body).
3. Superglue knob onto hex head of 5mm x 8mm bolt and glue the washer down the bolt to the knob.
4. Remove dovetail from main body slot and screw in 5mm x 8mm hex bolt (you may have to tap the hole to make this more smooth, I suggest it).
Depending on your printer, you may need to ream the 5/16in holes to ensure the bit fits.
TheSameNameTwice pubblica anche su
88 modelli aggiuntivi su altre 2 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
