DPS5015 Case with AC input

This case holds a DPS5015 with a 36 volt AC to DC converter and a fan to cool everything. The rear plug is a standard C14 power plug with a fuse.

Parts required:
DPS5015
AC to DC converter (Search for DC2416 power supply. I used a 36 volt, but there are multiple with the same footprint)
40mm fan
Voltage regulator for the fan
C14 panel mount plug with fuse holder
Round rocker switch (20mm hole)
Power terminals (there's a 4 mm hole, but you can easily drill it to whatever size you need.)
M3 bolts 5 or 6mm long
M3 heat inserts
M3 screws for plastic 5mm long
M4 bolts to hold the fan
Wire and connectors


Assembly is a bit fiddly, mostly because of the small space to work with. You'll definitely need a stubby screwdriver. I printed out a screwdriver bit holder from here on Thingiverse and used that. The best order for assembly is: DPS main board on top, AC/DC converter on the side, fan and voltage regulator, front panel, and lastly the rear panel.
If you get a fan that ma