Thingiverse
Dracula Ring from Dracula vs. Frankenstein
von mathias42
6
Downloads
6
Likes
0
Makes
This is a replica of the ring worn by Zander Vorkov as Dracula in Al Admson's 1971 masterpiece Dracula vs Frankenstein.
What I've made is the top only. It needs to glued onto a ring - I highly recommend Hoodlum's Blank Signet Ring - that's the one I used here. I find it's easier to print them out separately and glue them together - that way you don't need any supports.
The ring will need sanded. At this scale, those ridges really stand out, but a good going over and some primer will keep that eyeball from having a pupil!
Signet Ring Blank No Sharp Edges by Hoodlum
https://www.thingiverse.com/thing:5024027
What I've made is the top only. It needs to glued onto a ring - I highly recommend Hoodlum's Blank Signet Ring - that's the one I used here. I find it's easier to print them out separately and glue them together - that way you don't need any supports.
The ring will need sanded. At this scale, those ridges really stand out, but a good going over and some primer will keep that eyeball from having a pupil!
Signet Ring Blank No Sharp Edges by Hoodlum
https://www.thingiverse.com/thing:5024027
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
