MakerWorld

Make My Vase

Draft Vase

by Quastra · Make My Vase

3 Downloads

0 Likes

1 Makes

Simply Draft Vase. Printed on Bambu Lab X1C.Print Settings: 0.2mm Layer Height. Vase Modus, Bottom Shell Layer 5, Thickness of the Lower Shell 1mm.Filament: Bambu Lab PETG Blue Transzulent Light Blue.Print Duration: 4 Hours and 59 Minutes.Have Fun.

design vase vase design

Category

Make My Vase

Source

MakerWorld

Published

12.05.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

large print · 0.20mm layers

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PETG

Min. bed size

200 mm (Large)

Layer height

0.2 mm

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Draft Vase ?

Any FDM printer should handle Draft Vase just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print Draft Vase ?

According to the design notes, Draft Vase takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Draft Vase available in?

Draft Vase is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Draft Vase free to download?

Yes, Draft Vase is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Draft Vase

Similar Models

Add to Collection