MakerWorld

2D Art

Dragon black and white

by matt.slanzi95 · 2D Art

27 Downloads

12 Likes

10 Makes

Go to Model

printed with bambu lab P1S in 3.3 hours, i used black and white pla matte, print layer 0.2mm

dragon art chinease new year dragon

Category

2D Art

Source

MakerWorld

Published

12.01.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

3.3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Dragon black and white need supports when printing?

Yes, Dragon black and white will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Dragon black and white?

According to the design notes, Dragon black and white takes approximately 3.3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Dragon black and white available in?

Dragon black and white is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon black and white free to download?

Yes, Dragon black and white is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

5 Suggestions

Dragon black and white

Similar Models

Add to Collection