Dragon Eye - HueForge

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings. Nozzle: 0.4 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Sunlu Grey Transmission Distance: 5 PLA Sunlu Gold Transmission Distance: 5 PLA Sunlu White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #13 (1.12mm) swap to Gold At layer #15 (1.28mm) swap to White for the r