MakerWorld
Hueforge & Lithophane
Dragon Guard
by Corp
7
Downloads
11
Likes
2
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.6mm Filaments Used:PLA BambuLab Tough Black Transmission Distance: 0.6PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Silv
Sign in to leave a comment
Sign in