Dragon Guard

The image was captured from FB & processed in Hueforge. The result was brought into Bambu Studio where the 6 colors were added at the Hueforge defined layers. Save & print!! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x198.47mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Aqua Blue Trans