MakerWorld

Sculptures

Dragon Head

by marcoking79 · Sculptures

36 Downloads

19 Likes

14 Makes

schicht 0,2füllung 10%zeit 2h ich habe dieses model und viele weitere im BereichBoost Meich bin dran immer neue Fantasy Drachen Büste oder schlangen zu erstellen Drachen und schlangen köpfe

Category

Sculptures

Source

MakerWorld

Published

04.01.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Dragon Head need supports when printing?

Yes, Dragon Head will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Dragon Head ?

According to the design notes, Dragon Head takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Dragon Head available in?

Dragon Head is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon Head free to download?

Yes, Dragon Head is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragon Head

Similar Models

Add to Collection