Dragon - HueForge print

A mythical dragon set against a fiery sky in a line-art style, measuring 200x200mm. The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below. If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 6PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 8PLA BambuLab Basic Yellow Transmission Distance: 5.5PLA BambuLab Basic Jade White Transmission Distance: 6 Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Jade WhiteAt layer #11 (0.96mm) swap to BlackAt layer #12 (1.04mm) swap to RedAt layer #16 (1.36mm) swa