Dragon Japonais

Project: Dragon_Jap.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150.04x106.38mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Wine Red Transmission Distance: 1 PLA+ Numakers Pure White Transmission Distance: 4.8 This print uses 4 unique filaments Swap Instructions: Start with Pitch Black At layer #10 (0.88mm) swap to Black At layer #11 (0.96mm) swap to Wine Red At layer #16 (1.36mm) swap to Pure White for the rest.