Dragon Khan

by Th@rpedito · Hueforge & Lithophane

53 Downloads

27 Likes

12 Makes

Project: Dragon Khan.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.04x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #10 (0.88mm) swap to White At layer #22 (1.84mm) swap to Red for the rest.

Th@rpedito also publishes on

175 additional models across 1 more platforms

MakerOnline

175 models

♥ 3,396 ↓ 12,946

Frequently Asked Questions

Which 3D printer is suitable for Dragon Khan?

Any FDM printer should handle Dragon Khan just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Dragon Khan need supports when printing?

Yes, Dragon Khan will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon Khan available in?

Dragon Khan is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon Khan free to download?

Yes, Dragon Khan is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragon Khan

Similar Models

Add to Collection