Dragon – 3D printable model from MakerWorld

MakerWorld

Hueforge & Lithophane

Dragon

by Savick_3D · Hueforge & Lithophane

25 Downloads

30 Likes

14 Makes

Go to Model

HueForge Project: Dragon! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is a 125x125mm sized square. Filaments Used:PLA Inland BlackPLA Inland Light GrayPLA Inland BeigePLA Inland White This print uses 4 unique filaments. FEEL FREE TO USE YOUR OWN FILAMENT BRANDS. The end result will vary slightly with different brands and opacities, but it shouldn't be a significant difference if the colors are close to the same. Swap Instructions: (if you do not have an AMS unit, just add a pause at the following layer numbers and swap to the next color) Start with BlackAt layer #9 swap to Light GrayAt layer #14 swap to BeigeAt layer #20 swap to White for the rest. Please consider leaving a rating and a comment if you enjoyed this print! I greatly appreciate it! I hope you enjoy!

dragon dragon 2024 dragon 2d art animal animal 2d art animal art magic myth mythical mythical creature creature creature art design decor decoration art art 2024 art 2d fairytale folk lore

Category

Hueforge & Lithophane

Source

MakerWorld

Published

28.09.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 2 colors

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

125 mm (Medium)

Colors

2 (AMS/MMU recommended)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Dragon?

Any FDM printer should handle Dragon just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 125 mm is recommended.

Does Dragon need supports when printing?

Yes, Dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon available in?

Dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon free to download?

Yes, Dragon is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL