Thingiverse
dragon nunchuck
door thumper06
27
Downloads
45
Likes
0
Makes
This is a practice nunchuck,
Taulman's nylon 230 works best, but another nylon, TPU, or PETG will also work, PLA may be too brittle
Files:
dragonChuckRope.stl: print 2, after printing use paracord to tie nunchucks together with about 12 cm between
OR
dragonChuck.stl: print 2, you must also print the chain links
chainLinkClosed: print 1
chainLink.stl: print 3, you must plastic weld these links closed when assembled with dragon chucks and the other links
To plastic weld: Use a soldering iron with a large tip (do not use this tip for soldering)
Set soldering iron to 400C.
Use extra material to weld links closed.
Taulman's nylon 230 works best, but another nylon, TPU, or PETG will also work, PLA may be too brittle
Files:
dragonChuckRope.stl: print 2, after printing use paracord to tie nunchucks together with about 12 cm between
OR
dragonChuck.stl: print 2, you must also print the chain links
chainLinkClosed: print 1
chainLink.stl: print 3, you must plastic weld these links closed when assembled with dragon chucks and the other links
To plastic weld: Use a soldering iron with a large tip (do not use this tip for soldering)
Set soldering iron to 400C.
Use extra material to weld links closed.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
