Dragon Pose 3

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can change X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #2 (0.24mm) swap to Red At layer #6 (0.56mm) swap to Orange At layer #10 (0.88mm) swap to Black At layer #16 (1.36mm) swap to Dark Brown At layer #18 (1.52mm) swap to Gray At layer #21 (1.76mm) swap to Jade White for the rest.