Dragon Symbol

by Corp · Art

146 Downloads

43 Likes

0 Makes

Go to Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change X and Y but Z must remain the same. You may print at higher layer heights below the Min Depth of 0.48mm Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.3 This print uses 2 unique filaments. Substitute as needed. Swap Instructions: Start with White At layer #16 (1.36mm) swap to Black for the rest.

Corp also publishes on

299 additional models across 1 more platforms

MakerWorld

299 models

♥ 7,476 ↓ 7,888 ⚒ 1,924

Frequently Asked Questions

Which 3D printer is suitable for Dragon Symbol?

Any FDM printer should handle Dragon Symbol just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Dragon Symbol need supports when printing?

Yes, Dragon Symbol will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon Symbol available in?

Dragon Symbol is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Dragon Symbol free to download?

Yes, Dragon Symbol is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragon Symbol

Similar Models

Add to Collection