Dragon1 – 3D printable model from MakerWorld

MakerWorld

Hueforge & Lithophane

Dragon1

by Haxxsaw · Hueforge & Lithophane

25 Downloads

15 Likes

11 Makes

Go to Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Bambu Labs Tough Silver Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #9 (0.88mm) swap to Blue Gray At layer #14 (1.28mm) swap to Silver At layer #18 (1.6mm) swap to White for the rest.

art wallart hueforge dragon

Category

Hueforge & Lithophane

Source

MakerWorld

Published

01.03.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Dragon1?

Any FDM printer should handle Dragon1 just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Dragon1 need supports when printing?

Yes, Dragon1 will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon1 available in?

Dragon1 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon1 free to download?

Yes, Dragon1 is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL