DragonBall HueForge

Ho realizzato questa stampa in onore di uno dei miei manga preferiti, di seguito le istruzioni per stamparla con o senza AMS. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Savannah Yellow At layer #12 (1.04mm) swap to Sunrise Orange At layer #15 (1.28mm) swap to White for the rest.