Dragonflies Bookmark

A colourful bookmark created in HueForge using 4 colours. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 54.15x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.19249mmFilaments Used: (* = Owned) #00ae42 * PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #0086d6 * PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5 #ffaaff * PLA Eureka Rose Pink Transmission Distance: 5.5This print uses 4 unique filamentsSwap Instructions: Start with BambuLab Green At layer #16 (0.76mm) swap to Cyan At layer #19 (0.88mm) swap to Jade White At layer #32 (1.4mm) swap to Rose Pink for the rest.