Dragons Breath Mosaic

by Corp · Hueforge & Lithophane

54 Downloads

51 Likes

6 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Each plate of the model is 200x200mm in size for a total of 600x600mm. You can change the X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Grey Transmission Distance: 1PLA BambuLab Basic White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filaments. Substitute as needed. Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Blue GrayAt layer #9 (0.8mm) swap to GreyAt layer #11 (0.96mm) swap to WhiteAt layer #14 (1.2mm) swap to RedAt layer #21 (1.76mm) swap to OrangeAt layer #23 (1.92mm) swap to Yellow for the rest.Boost MeGot a Boost to spare?

dragon breath hueforge decor decoration wall art 2d 3d pic picture painting unique original fire fantasy myth multicolor ams x1c

Corp also publishes on

338 additional models across 1 more platforms

MakerOnline

338 models

♥ 12,227 ↓ 46,412

Frequently Asked Questions

Which 3D printer is suitable for Dragons Breath Mosaic?

Any FDM printer should handle Dragons Breath Mosaic just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Dragons Breath Mosaic need supports when printing?

Yes, Dragons Breath Mosaic will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragons Breath Mosaic available in?

Dragons Breath Mosaic is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragons Breath Mosaic free to download?

Yes, Dragons Breath Mosaic is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragons Breath Mosaic

Similar Models

Add to Collection