Slicer Discord
3DSEARCH / Garden / Drainpipe connector
Drainpipe connector – 3D printable model from MakerWorld MakerWorld
Garden

Drainpipe connector

by 73pctGeek · Garden
14 Downloads
4 Likes
7 Makes
Go to Model
Needed to connect two pieces of drainpipe together. More specifically to connect a pipe with an external dimension of 75mm to a pipe with an internal dimension of 65mm. Ended up designing a 2mm thick connector with external dimensions of 80.2mm (largest/top part) that narrows to 64mm (smallest/base part). Internal chamfer helps with both printing and water. Printed at 0.2mm layer height and with 20% gyroid infill.
Category
Garden
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
0.20mm layers
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Layer height
0.2 mm
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

73pctGeek also publishes on

17 additional models across 2 more platforms

Printables
14 models
♥ 255 ↓ 1,164 ⚒ 12
Thingiverse
3 models
♥ 677 ↓ 744
Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Drainpipe connecter aka Nedløpsskjøtestykke
Drainpipe connecter aka Nedløpsskjøtestykke
by 73pctGeek
↓ 22 ♥ 2
Venturi - 3Dponics Drip Hydroponics
Venturi - 3Dponics Drip Hydroponics
by 3dponics
↓ 545 ♥ 315
water connector tube
water connector tube
by rael oblack
↓ 17 ♥ 2
Water connector AquaBrush
Water connector AquaBrush
by Dominik Chabros
↓ 7 ♥ 3
Water pipe connector Joiner and Devider
Water pipe connector Joiner and Devider
by Wilko_SLO
↓ 1.8k ♥ 289
Garden/Water hose 3/4 inch quick connector
Garden/Water hose 3/4 inch quick connector
by Ichooorrr
↓ 486 ♥ 60
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection