Drake Tribal - Hueforge

Tribal-style dragon design.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x150mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.84mm and the Actual Thickness is 2.16mm     #000000 PLA BambuLab Basic Black Transmission Distance: 0.6     #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 5     #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2     #ff6a13 PLA Bambulab Orange Transmission Distance: 5.6     #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Dark Gray     At layer #14 (1.2mm) swap to Scarlet Red     At layer #15 (1.28mm) swap to Orange     At layer #20 (1.68mm) swap to Jade White This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.     At layer #27 (2.24mm) swap to Black for the rest.