Drawer Handle Router Template

For materials from 10 to 16 mm thickness

## Steps
1. Cut/sand the wood close to its later outline (1 - 3 mm should be perfect)
2. Drill two 6 mm holes with the drill template
3. Lock the drill template with two 6 mm wooden dowels (or use printed dowels)
4. Mill the outline
5. Put the piece in the outer frame, lay the inner guide on top and mark the outline
6. Drill or cut the inner outline 1 - 3 mm to the mark
7. Mill out the inside with the inner guide attached
8. Attach to Drawer and enjoy

Have fun (: