Drawer organizer system

Drawer organiser system that can be adjusted and extended as needed.

Rails
=====

These can be stretched to the required length in your slicer. I printed these on-end, in vase (or spiralizer) mode with a 0.4mm nozzle.

The rails have a 3mm groove running through one face. This is to enable a printed tray to be placed underneath with the lip of the tray sitting in the grooves.

Trays
=====

At the moment one example tray is included in this 'thing'. The example is 100x200 meaning a box with internal dimensions of 90x190.

They are not essential but are easy to design. The tray needs to be 10mm larger in both dimensions that the internal dimensions of the box section. It can be as thick as you like (I printed mine at 1mm thick) but it needs a 1mm ridge printed around the edge of the tray to sit into the grooves on the rails. This ridge should be around 3mm high.



Connectors
==========

Connectors are provided for corners, 3 and 4 way connectors and straight conn