Drawer Organizers

**(!) NOTE (!):** If you print these as-is, you'll likely need to sand/file/cut to fix clearance issues with the dovetails. I'm posting these more as inspiration than as something ready to print.

There are two standalone organizers
* one for large pliers/tape measure/etc
* one for screwdrivers, flashlight, etc

The remaining parts fit together with dovetails, and must be fastened to something - they are not self-supporting.
* angle bracket with dovetails - must be screwed to bottom/side of drawer.
* 1/4" honeycomb for hex bits
* 3-hole holder for needle nose pliers, etc (I use 2)
* 2-hole holder for larger tools such as wire stripper (I use 1)

While the dovetails are common to all of these modules, the widths vary. Changing the order without adjusting the dovetail positions on the angle bracket would likely result in the modules colliding. The order I used is: honeycomb, 3-hole, 3-hole, 2-hole.