Drawers for poop + tools for self-made riser

Searching for a riser on the common portals was, in my opinion, lacking depending on the model.A lot of filament is printed (without knowing if it's what I'll ultimately need).The use of the exposed aggregate concrete slab to reduce vibrations is a no-go.Depending on the filament used, it costs too much in my opinion.Plans to build it with drawer systems, for example, from IKEA, were also far too expensive. I had the following requirements:It should be as cost-effective as possibleStability should be maintainedThe exposed aggregate slab should be retainedThe riser shouldn't be too high so that I can still open the glass plate of the X1C (there's a shelf above it)A drawer should be installed under the printer to catch the poop. I took my existing concrete slab and a wooden strip measuring 23x45x2000mm and shortened it three times to 400mm. I then attached it to the underside of my concrete slab using assembly adhesive. The drawers were designed in Fusion 360 and include: