drawn butterfly hueforge

by Michele MM3D · Hueforge & Lithophane

74 Downloads

58 Likes

18 Makes

hueforged butterfly Here you can find all my HueForge creations: https://makerworld.com/en/@MicheleMM3D/collections/503504 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #8 (0.72mm) swap to Beige At layer #13 (1.12mm) swap to Jade White At layer #20 (1.68mm) swap to Black At layer #21 (1.76mm) swap to Red for the rest.