Dreamy Whale

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm (Feel free to add brim if you have adhesion issues),I would check the flush options (if you have AMS).For me 0.25 multiplier is good enough.You can resize it but don t change the height.Z height must be 1.80mmAlso i have 1 AMS so i paused the print at the mid of red layer and changed the other spools. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Purple Transmission Distance: 0.5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA PolyLite Pro Light Yellow Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap Instructions: -- Start with Black At layer #9 (0.8mm) swap to Blue At layer #10 (0.88mm) swap to Purple At layer #11 (0.96mm) swap to Scarlet Red At layer #13 (1.12mm) swap to Light Yellow At layer #15 (1.28mm) swap to White for the rest.