Dremel / Parkside drill press

credit to LSC_193152 Hi!I want to introduce you my drill press for Dremel/Parkside multitools. It's easy to print and assemble - you only need a few screws and nuts to put it together. IMPORTANT NOTE: Print Lock_nut_Parkside.stl and/or Lock_nut_Dremel.stl first to check if your multitool is compatibile with this model. If not- you can remix it :)Tested on my Parkside PFBS 12 B6 - works well.Print settingsPrint with high infill (60-80%), PETG recommended.All files are oriented in the best way.Base and Tool holder require supports.Bill of materialPrinted parts:- 1 x Base- 1 x Lever- 4 x Lever sleeve- 1 x Lock nut - choose the correct one according to your multitool- 1 x Tool holder- 1 x Z guide- 2 x Z railScrews & nuts:- 12 x M6 nuts - Nylock nuts highly recommended- 4 x M6x20 FHCS- 7 x M6x25 SHCS- 1 x M6x30 SHCSOther:- Tension spring (50mm), or rubber bands- Some greaseAssembly manualPut 4 M6 nuts into Z guide lower pockets: Put Z guide into Base: Screw together using 4 M6x20 FHCS s